S54 Single Coil Eye Horizontal
Compare the description below to the Strapping Restrictions for HSLA, strap according to whichever is greater.
|1.||Two circumference straps spaced maximum 4 in. (102 mm) from coil edges.|
|2.||Seal protectors under o.d. strap seals.|
|3.||Plastic flanged inside diameter edge protector.|
|4.||Metal corner protectors under ID straps.|
WARNING ! NOTE
AUTO EXPOSED PRODUCT Apply protective diaper to bottom of coil, 3-9 o’clock, edge to edge, taped to OD straps, to protect coil surface. (See item #7 on S82) No writing is allowed on any coil surface. When code contains U, apply paper shroud, refer to Coils Section 200U.
Revised December, 2009
Issued March, 2002