Contents
of Section:
Item Identification
Table 2 Detail Information
Number: OP-7998-007
Issue Date: October 1, 1995
Revision Date: January 29, 1997
3.10.7 LIN - Item Identification
Purpose: To specify basic
item identification data.
Example: LIN*00001*VO*
182620209*SN* J601931*HN*901702
| ID | # | Name | Attributes | Explanation | Values |
| LIN01 | 350 | Assigned Identification | O AN 1/11 | Sequence Number | |
| LIN02 | 235 | Product/Service Identification Qualifier | M ID 2/2 | Dofasco Sales Order Number | VO |
| LIN03 | 234 | Product/Service Identification | M AN 1/30 | ||
| LIN04 | 235 | Product/Service Identification Qualifier | M ID 2/2 | Dofasco Material ID Number | SN |
| LIN05 | 234 | Product/Service Identification | M AN 1/30 | ||
| LIN06 | 235 | Product/Service Identification Qualifier | O ID 2/2 | Heat Number | HN |
| LIN07 | 234 | Product/Service Identification | X AN 1/30 | ||
| LIN08-
LIN31 |
Not used |
3.10.8 PID - Product/Item Description
Purpose: To describe a product or process in coded or free-form format.Example: PID*S*MAC*ST
*01
| ID | # | Name | Attributes | Explanation | Values |
| PID01 | 349 | Item Description Type | M ID 1/1 | Structured
Semi-Structured |
S
X |
| PID02 | 750 | Product/Process Characteristic Code | O ID 2/3 | Commercial Status
Material Classification Quality Assurance Status Material Status Outside Processor Manufacturing Process |
CMS
MAC QAS MA PR |
| PID03 | 559 | Agency Qualifier Code | X ID 2/2 | Steel (AISI) | ST |
| PID04 | 751 | Product Description Code | X AN 1/12 | Commercial Status Code
Material Classification Code Quality Assurance Status Code Material Status Code Manufacturing Process Code |
AISI Table 69
AISI Table 67 AISI Table 68 AISI Table 70 AISI Table 66 |
| PID05 | 352 | Description | X AN 1/80 | Material Comments | |
| PID06 | 752 | Surface/Layer/Position Code | X AN 1/80 | Last Process Performed
Next Process Peformed |
R1
R6 |
| PID07-
PID08 |
Not used |
top
of page
3.10.9 MEA - Measurements
Purpose: To specify physical measurements or counts, including dimensions, tolerances,variances and weights.Example: MEA*WT*WT*40380*LB
| ID | # | Name | Attributes | Explanation | Values |
| MEA01 | 737 | Measurement Reference Identification Code | O ID 2/2 | Counts
Physical Dimensions (Product Ordered) Weights |
CT
PD WT |
| MEA02 | 738 | Measurement Qualifier | O ID 1/3 | Inside Diameter
Length Number per Lift Outside Diameter Thickness Weight Width |
ID
LN NL OD TH WT WD |
| MEA03 | 739 | Measurement Value | X R 1/10 | ||
| MEA04 | 355 | Unit/Basis for Measurement Code | X ID 2/2 | Inches, Decimal - Actual
Inches, Decimal - Minimum Linear Feet Pieces Pound Sheets |
E8
EM LF PC LB SH |
| MEA05-
MEA10 |
Not used |
3.10.10 DTM - Date/Time Reference
Purpose: To specify pertinent dates and times.Example: DTM*009*960101
| ID | # | Name | Attributes | Explanation | Values |
| DTM01 | 374 | Date/Time Qualifier | M ID 3/3 | Last Process Performed
Status (Outside Processor) |
009
206 |
| DTM02 | 373 | Date | X DT 6/6 | (Format: YYMMDD) | |
| DTM03-
DTM05 |
Not used |
3.10.11 REF - Reference Numbers
Purpose: To specify identifying numbers.Example: REF*SE*120045
| ID | # | Name | Attributes | Explanation | Values |
| REF01 | 128 | Reference Number Qualifier | M ID 2/2 | Processor Material ID
Processor Previous Material ID Dofasco Lift Ticket Number |
SE
RV 97 |
| REF02 | 127 | Reference Number | X AN 1/30 | ||
| REF03 | Not used |